Filter
Top Products
242 Management: Installing Array Components
Front Bezel (Optional)
Removing the Front Bezel
1
Using the system key, unlock the front bezel (if locked).
2
Lift up the release latch next to the keylock.
3
Rotate the left end of the bezel away from the front panel.
4
Unhook the right end of the bezel and pull the bezel away from
the system.
Figure 16-1. Removing and Installing the Front Bezel
Installing the Front Bezel
1
Hook the right end of the bezel onto the chassis.
2
Fit the free end of the bezel onto the system.
3
Secure the bezel with the keylock. See Figure 16-1.
1 bezel 2 keylock
3 release latch 4 hinge tab
1
2
3
4
book.book Page 242 Tuesday, June 18, 2013 3:03 PM