Filter
Top Products
Installation and Upgrade Procedures 2-9
NOTE: If you want to install both a Dell managed node and a management
workstation on the same server, make sure to reboot the server between the two
installations.
,ID&XUUHQW9HUVLRQRI'HOO+,3,V,QVWDOOHG
After you have selected a Windows NT or NetWare installation and the You have a
current version of Dell OpenManage HIP installed. Do you want to
install additional hardware components? message appears, perform
these steps:
1. C l i ck Yes to continue to add hardware components.
2. Click No and the following message appears.
Do you want to overwrite the current installation of Dell
OpenManage HIP?
3. Click Yes to install or click No to stop the installation process.
7R8QLQVWDOO+DUGZDUH&RPSRQHQWV,QVWDOOHG6HSDUDWHO\
Double-click the Uninstall Hardware Components icon in the Dell Managed Node
folder. Doing so uninstalls only the hardware components that you installed
separately.
NOTE: To uninstall originally installed components, refer to “Uninstalling a Dell Man-
aged Node From a Windows NT Server” found later in this chapter.
+DUGZDUH,QVWUXPHQWDWLRQ,QVWDOODWLRQ
Instrumentation for a hardware vendor component has to be running on the managed
server in order for the console application to be able to manage/monitor it. A check
box is provided for the different instrumentation that can be installed as part of the
Dell HIP node installation process.
To install a particular hardware component, check the box corresponding to the hard-
ware installed on the managed server. The drivers for the respective hardware must
be installed prior to installation of the instrumentation. In some cases, the driver is
included as part of the Dell HIP managed node installation process when the compo-
nent is chosen (for example, DRAC version 2.0).
After the chosen hardware component instrumentation is installed as part of the Dell
HIP node installation, remember to reboot the system. The instrumentation and
required services start automatically. If they fail to start, that component may not be
manageable from the management console.
NOTE: The Dell Inspector is automatically installed when the Dell managed node is
installed. On the managed node server, the Dell Inspector starts a service called
dmisrv
for use with the Microsoft Systems Management Server (SMS) database.
Program folders allow for launching the Dell Inspector from the
Start
button.