Filter
Top Products
Installation and Upgrade Procedures 2-19
Dell OpenManage Remote Assistant and Dell Remote Assistant Server service
Dell PowerEdge Expandable RAID Console
Adaptec CI/O Array-Based Management
Adaptec Duralink Server Manager
American Power Conversion (APC) PowerNet Console
MobileChoice Paging
If a managed server detected by the discovery process has hardware installed (except
for MobileChoice Paging), the expanded node for the managed server shows an icon
corresponding to the console application for that hardware.
NOTE: You must install the Dell HIP on a server for the icons to appear. Icons for the
vendor console do not appear for servers that have vendor hardware and software
installed (Dell PowerEdge Expandable RAID Console and Adaptec CI/O Array-Based
Management only).
'HOO2SHQ0DQDJH6HUYHU&RQVROH
Dell OpenManage Server Console allows you to perform the following tasks:
View the hardware configuration
View the event and power-on self-test (POST) logs
Configure actions on a server
Browse the MIFs for DMI 2.0 managed node servers
Configure security features
Configure the DRAC version 2.0 card on the server
Dell OpenManage Server Console can be launched on a management station by
double-clicking the icon in the expanded-node submap.
'HOO,QVSHFWRU
NOTE: The DMI version included in NNM SE supports only 32-bit operating systems.
The Dell Inspector is compatible with Microsoft Windows 95 and Windows NT 4.0,
but not with Windows 3.
x
.
The Dell Inspector gives you the capability to view the configuration of the system
and to browse the MIFs loaded on workstation, desktop, and portable computers.
The Dell Inspector can be launched by double-clicking the icon in the expanded-node
submap.
'HOO2SHQ0DQDJH5HPRWH$VVLVWDQWDQG'HOO5HPRWH
$VVLVWDQW6HUYHU6HUYLFH
The Dell Remote Assistant Server Service runs on a management station and man-
ages connections to and from Dell PowerEdge servers equipped with DRACs.