Filter
Top Products
2-10 HP OpenView NNM SE 1.2 With Dell OpenManage HIP 3.2 User’s Guide
The hardware component instrumentation is as follows:
DRAC version 2.0
NOTE: If you do not have a DRAC version 2.0 card, you should not install DRAC
version 2.0 instrumentation (for example, if you have a PowerEdge 2200 system
with DRAC or a PowerEdge 6100 system with a SMM card).
Dell PowerEdge Expandable RAID Controller
Adaptec Comprehensive Input/Output (CI/O) Array-Based Management
NOTE: The Adaptec CI/O Array-Based Management instrumentation check box is
selected by default because the small computer system interface (SCSI) control-
ler is on the system board.
Adaptec Duralink Server Manager
NOTE: To run the Adaptec Duralink SNMP Manager for web-based management
of Adaptec Duralink network interface controllers (NICs), install Microsoft Inter-
net Explorer 3.0 or later and a World Wide Web (WWW) server before installing
the management station.
On Microsoft Windows NT Workstations, the Microsoft Peer Web Services pro-
vide an Internet Service Manager (ISM) that configures the directories for the
application.
On Microsoft Windows NT Server operating systems, the Microsoft Internet
Information Service (IIS) provides the necessary setup.
NOTE: For further information, refer to “Adaptec Duralink Server Manager” found
later in this chapter.
IBM
local area network (LAN) adapter Desktop Management Interface (DMI)
support
Intel
DMI 2.0 network adapter
NOTE: The management information format (MIF) for the IBM LAN Adapter card and
the Intel Network Adapter card can be browsed by using the Dell Inspector.
0DQDJHPHQW6WDWLRQ5HTXLUHPHQWV
To install either Microsoft Peer Web Services or Microsoft IIS, use the following
procedure:
1. Click the Network applet in the Control Panel.
2. Click the Services tab in the Network applet.
3. Click Add...
A window appears containing a list of services that can be installed from either
the Windows NT Workstation or the Windows NT Server CD.