Filter
Top Products
2. Remove the display bracket.
Replacing the Display Bracket
1. Position the display bracket on the display panel.
2. Replace the two M2 x 3mm screws to secure the display bracket to the panel.
Remove the Display Cover
1. Follow the instructions in Before Working on Your Computer
2. Remove the display assembly (see Removing the Display Assembly).
3. Remove the display bezel (see Removing the Display Bezel).
4. Remove the display panel (see Removing the Display Panel).
5. Remove the optional camera and microphone, if present (see Removing the Camera and Microphone Assembly
Replace the Display Cover
1. Remove the tape from the cables that are taped to the display cover.
2. Replace the camera and microphone assembly, if one was removed previously (see Replacing the Camera and Microphone Assembly).
3. Replace the display panel (see Replacing the Display Assembly).
4. Replace the display bezel (see Replacing the Display Bezel).
5. Replace the display assembly (see Replacing the Display Assembly).
6. Replace the hinge covers (see Replacing the Hinge Covers).
1
display panel
2
M2 x 3-mm screw (2)
3
display panel bracket
CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.
NOTICE: Position all display assembly cables toward the back, away from the base assembly before installing the display assembly.
CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.