Filter
Top Products
85
Chapter 2. Getting Started the BHT and System Mode
Selecting "1:LCD" on the TEST DISPLAY menu calls
up the test pattern shown at left on the LCD and
turns on the indicator LED in green.
Each time the ENT key is pressed, the screen shifts
to the next test pattern. To return to the previous
screen, press the BS key.
To stop this test while in progress, press the C key.
[5.6] LCD, indicator LED, and touch screen tests
As shown at left, everything disappear and the
indicator LED lights in red.
⇑ ⇓
⇑ ⇓
ENT key
BS key
ENT key
BS key
In System Mode, you may test the LCD, indicator LED, and touch screen.
.
Selecting "6:LCD" on the TEST menu calls up the
screen shown at left on the LCD.
1 LCD: Tests the LCD and indicator
LED.
2 TOUCH SCREEN1: Tests touch-keys.
3 TOUCH SCREEN2: Tests the graphics pad box by
drawing an image with the
stylus.
Select a desired item by using the numerical keys
or M1 and M2 keys, then press the ENT key.
LCD & indicator LED test