Filter
Top Products
14
■ Ir-Transfer Utility C (option)
Running on the host computer, this utility transfers files between the BHT and the host
computer. For its file transfer control procedure, the utility uses the BHT-Ir protocol.
(For the details about the BHT-Ir protocol, refer to Chapter 3, Subsection 3.4.2.)
To transfer files under any of the following conditions, use Ir-Transfer Utility C:
- At transmission speeds of 115200 or 57600 bps (This may be impossible de-
pending upon the host computer type.)
- When the BHT is placed on the CU-7000
- Via the direct-connect interface of the BHT
■ Ir-Transfer Utility E (option)
Running on the host computer, this utility transfers files between the BHT and the host
computer. For its file transfer control procedure, the utility uses the BHT-Ir protocol.
(For the details about the BHT-Ir protocol, refer to Chapter 3, Subsection 3.4.2.)
To transfer files under any of the following conditions, use Ir-Transfer Utility E:
- Via an external IR transceiver
- Via an IR port integrated in a computer
■ Transfer Utility (option)
Running on the host computer, this utility transfers files between the BHT and the host
computer. For its file transfer control procedure, the utility uses the BHT-protocol.
(For the details about the BHT-protocol, refer to Chapter 3, Subsection 3.4.1.)
To transfer files under any of the following conditions, use Transfer Utility:
- When the BHT is placed on the CU-7000
- Via the direct-connect interface of the BHT