Filter
Top Products
23
Chapter 2. Getting Started the BHT and System Mode
2.3.2 Setting-up 2: Setting the Calendar Clock
Turn the BHT on by pressing the PW key.
The following message will appear.
Use the numerical keys to enter the year (only the
last two digits), month, day, hour, and minute in
this order. If the data is in one digit, add a 0 (zero)
preceding the data.
For the year, be sure to enter the last two
digits of the year. For the hour, enter it in the
24-hour format.
If any of the year, month, day, hour, and
minute is not entered, the ENT key will be
deactivated.
If you make a wrong entry, press the BS key to
delete it and then enter the correct data.
[Example] To set 2000, April 19, at 4:00 p.m.
Press 0, 0, 0, 4, 1, 9, 1, 6, 0, and 0. Then press the
ENT key to register the new setting.
In the following cases, the above message will appear. In such instances, it is
necessary to set the date and time. (The indication "00/01/01 00:00" will differ
depending upon the calendar clock state.)
• The BHT is first turned on from the time of purchase.
• The BHT is turned on after the memory backup power source is com-
pletely discharged.
If the above screen does not appear, follow the calendar clock setting procedure given
in Subsection 2.5.3, [4.3] to set the calendar clock.