Filter
Top Products
10/100 Fast Ethernet Switch User’s Guide
4
Introduction
♦
Data forwarding rate 14,880 pps per port at 100% of wire-speed for
10Mbps speed.
♦
Data forwarding rate 148,800 pps per port at 100% of wire-speed for
100Mbps speed.
♦
Data filtering rate eliminates all error packets, runts, etc. at 14,880 pps
per port at 100% of wire-speed for 10Mbps speed.
♦
Data filtering rate eliminates all error packets, runts, etc. at 148,800
pps per port at 100% of wire-speed for 100Mbps speed.
♦
8K active MAC address entry table per device with self learning and
table aging.
♦
8 MB packet buffer per device.
♦
Supports broadcast storm rate filtering.
Management
♦
RS-232 console port for out-of-band network management via a PC.
♦
Spanning Tree Algorithm Protocol for creation of alternative backup
paths and prevention of indefinite network loops.
♦
D-View Network Management Program for standard SNMP-based
management.
♦
Fully configurable either in-band or out-of-band control via SNMP
based software.
♦
Flash memory for software up-grade. This can be done in-band via
BOOTP/TFTP. D-View or out-of-band console can also initiate a
download request.
♦
Built-in SNMP management: MIB-I (RFC 1156), MIB-II (RFC
1213), Bridge MIB (RFC 1268) and D-Link proprietary MIB.