Filter
Top Products
10/100 Fast Ethernet Switch User’s Guide
48
Using the Console Interface
on or when a system reset occurs. The Switch allows traps to be routed to up
to four different network management hosts.
For a detail list of Trap Types used for this Switch, see
Chapter 5,
Switch
Management
,
Traps
section.
Figure 6-14. SNMP Trap Manager Configuration Menu
The following trap parameters can be set:
♦
IP Address:
gives the IP address of the network management station
to receive the trap.
♦
SNMP Community String:
determines the SNMP community name
to be included in the trap request.
♦
Status:
determines whether this trap entry is valid or invalid. You
can delete an entry by changing its status to Invalid.