Filter
Top Products
10/100 Fast Ethernet Switch User’s Guide
Using the Console Interface
33
♦
9,600 baud
♦
8 data bits
♦
No parity
♦
One stop bit
You can also access the same functions over a
TELNET
interface. Once
you have set an IP address for your Switch, you can use a
TELNET
program
(in a VT-100 compatible terminal mode) to access and control the Switch.
All of the screens are for the most part identical, whether accessed from the
console port or from a
TELNET
interface.
Console Usage Conventions
The console interface makes use of the following conventions:
1.
Items after a colon
”:”
are read-only values, displayed for
information purposes. The cursor cannot be moved to these items.
2.
Items in
<
angle brackets
>
can be toggled on or off using the space
bar.
3.
Items in
[
square brackets
]
can be changed by typing in a new value.
You can use the backspace and delete keys to erase characters behind
and in front of the cursor.
4.
The up and down arrow keys, the left and right arrow keys, the tab
key and the backspace key, can be used to move between selected
items. It is recommended that you use the
tab key
and
backspace key
for moving around console.
5.
Items in UPPERCASE are commands. Moving the selection to a
command and pressing Enter will execute that command, e.g. SAVE,
EXIT, etc.