Filter
Top Products
10/100 Fast Ethernet Switch User’s Guide
62
Using the Console Interface
Figure 6-24. Factory Reset
2.
Move the cursor to
Yes
to confirm the reset and press Enter.
3.
The main menu screen should appear. Move the cursor to the TCP/IP
Parameters Configuration Menu and input: the
IP Address, Subnet
Mask and Default Gateway
. The
Send BootP Request Upon Power
Up
is an optional field for your response. Using the spacebar, toggle
your response in this field at this time.
4.
Move the cursor to SAVE and press Enter.
5.
Move the cursor to EXIT and press Enter. The Switch should restart,
and all of its parameters will be reset to their default values.