Filter
Top Products
10/100 Fast Ethernet Switch User’s Guide
Using the Console Interface
59
7.
Go to the SAVE command and save the Protocol Parameters.
8.
Choose EXIT and hit the enter key to leave the Protocol Parameters.
Figure 6-21. Protocol Parameters
STAP Port Parameters
The STAP Port Parameters allows you to change the behind the scene
parameters of the Spanning Tree Algorithm at the port level. The parameters
for this section have been fully explained in Chapter 5,
Switch
Management
,
see
STA Operation Levels: On the port level
, and
User-changeable
parameters
. It is recommended that you read these sections and/or Chapter 5
first before changing any of the parameters.
To change the STAP Port Parameters:
1.
Choose Spanning Tree Algorithm from the main menu.
2.
Choose
STAP Port Parameters
from the Spanning Tree Algorithm
menu.
3.
Enter the desired port in the
Port Number
(1-8) field.
4.
Enter the desired Port Path Cost in the
Port Path Cost (1-65535)
field.