D-Link DES-1228P Switch User Manual


 
4 SmartConsole Utility D-Link Web Smart Switch User Manual
4 SmartConsole Utility
D-Link SmartConsole Utility allows the administrator to quickly discover all D-Link smart switches which are
in the same domain the PC, collect traps and log messages, and quick access to some basic configurations
of the switch.
The SmartConsole Utility is divided into three parts, Device Configurations at the top, Device List, and
SmartConsole Settings at the left.
Figure 14 – SmartConsole Utility
SmartConsole Settings
The SmartConsole Settings at the left has five icons, Utility Settings, Log, Trap, File, and Help.
Utility Settings
By clicking on this icon the Utility Settings window will pop up. Refresh time refreshes the devices which
were selected as monitored device in the Device List. Choices include 15 secs, 30 secs, 1mins, 2mins and
5 mins for selecting the monitoring time intervals. Utility Group Interval establishes the intervals (in
seconds) that the Switch will be discovered in the SmartConsole Device List.
Figure 15 – SmartConsole Utility Settings
NOTE: If the Group Interval is set to 0, IGMP
snooping must be disabled or the Web-Smart
Switch will not be discovered.
1
1
1
1