Filter
Top Products
59
System Commands
The System Commands are used to save settings to non-volatile memory, to reboot the Router and to restore
factory default settings to the Router.
Figure 4-15. Tools – System Commands menu
Click on the appropriate menu button to perform the following system tasks:
System Function Description
Save All
In order to save the configuration changes you have just made they must be
saved to the Router’s non-volatile RAM by clicking on the Save All button.
Restart
Click the Restart button to restart the Router. If you have not saved your
changes, the Router will revert to the previously saved configuration upon
rebooting the Router.
Restart AP
Click to restart the Wireless AP (Access Point). The Wireless AP must be
restarted any time wireless configuration is changed.
Restore
The DSL-G604T can be reset to the default configuration for all settings using
the Restore option. This will also change the both the LAN and WAN IP
address of the device, so these will need to be reconfigured accordingly.
To perform a factory reset, click the Restore button. Since the IP settings will
return to their default, you will lose access to the Web Manager. To use the
Web Manager interface, the LAN IP address will need to be reconfigured.