Filter
Top Products
60
Remote Log
Us the Remote Log menu to set up logging to servers or computers that are located outside the LAN or subnet of
the Router.
Figure 4-16. Remote Log menu
Select the Log Level from the pull-down menu. The levels available are: Alert, Critical, Debug, Error, Info,
Notice, Panic and Warning. Type in the IP address of a receiver for the log message in the Add an IP Address
field and click on the Add button. Log message receivers that are added appear listed in the Select a logging
destination pull-down menu. These may be used at any time for other types of log messages. To remove a log
message receiver from the list, select it and click on the Remove button. Click the Apply button when you have
configured the log message receivers. Remember to save the settings to non-volatile memory.