Filter
Top Products
12
Connecting PoE (Power over Ethernet)
Connect one end of an Ethernet cable (included with your pack-
age) to the LAN port on the DWL-2200AP and the other end of
the Ethernet cable to the port labeled P+DATA OUT on the PoE
base unit.
Connect another Ethernet cable from the DATA IN port on the
PoE base unit to your router/switch, using a straight through
cable, or to a PC, using a crossover cable.
Attach the power adapter to the connector labeled POWER IN on
the PoE base unit. Attach the power cord to the power adapter
and into an electrical outlet.
Step 1
Step 2
Step 3