Filter
Top Products
44
Device Conguration>General (continued)
Using the AP Manager (continued)
•
Telnet Support: This pulldown selection enables or disables the ability to Telnet
into the selected device(s).
Telnet Timeout: This pulldown selection defines the timeout period during a
Telnet session with the selected device(s).
Console Protcol: Choose None, Telnet or SSH.
Protocol Timeout: Select a time peviod after which session timeout will occur.
Load Balance: Select Enable or Disable.
User Limit: When Load Balance is enabled, select the user limit.
Link Integrate: Select Enable or Disable.
Ethernet Link Status: Displays the link status of the Ethernet connect.
Limit Administrator IP: Enable the Limit Adrninstrator IP, you can set one or
two IP address which allowed to manage this AP.
Community String: Enter the Public/Private Community string as the password
to access the SNMP Service.
•
•
•
•
•
•
•
•
•