Filter
Top Products
19
Using the Conguration Menu (continued)
Home > Wireless> WDS with AP Mode(continued)
Enter the MAC address of the APs in your network that will
serve as bridges to wirelessly connect multiple networks.
Remote AP
MAC Address-
Authentication
:
Open System
Shared Key
Open System/Shared Key
WPA-PSK
WPA2-PSK
WPA-Auto-PSK
Select Open System to communicate the key across the network.
Select Shared Key to limit communication to only those devices that share the same
WEP settings.
Select Open System/Shared Key to allow either form of data encryption.
Select WPA-PSK, WPA2-PSK, WPA-Auto-PSK to secure your network using a
password and dynamic key changes. (No RADIUS server required).
Encryption:
Key Type*:
Key Size:
Valid Key:
First through
Fourth keys:
Select Disabled or Enabled. (Disabled is selected here).
Select HEX or ASCII.
Select 64-, 128-, 152-bits.
Select the 1st through the 4th key to be the active key.
*Hexadecimal digits consist of the numbers 0-9 and the letters A-F
ASCII (American Standard Code for Information Interchange) is a code for
representing English letters as numbers from 0-127
Home > Wireless> WDS with AP Mode> WEP Encryption
Input up to four keys for encryption. You will select one of these
keys in the valid key eld.
Home > Wireless> WDS with AP Mode> WPA-PSK, WPA2-PSK,
WPA-Auto-PSK
Cipher
Type:
Group Key
Update Interval:
Select the interval during which the group key wll be valid. The
default value of 1800 is recommended.
Select AES or AUTO from the pull down menu.
Enter a PassPhrase in the corresponding eld.
PassPhrase: