D-Link DWL-2200AP Network Router User Manual


 
15
Using the Conguration Menu (continued)
Home > Wireless> AP Mode(continued)
Authentication:
Open System
Shared Key
Open System/Shared Key
WPA-EAP
WPA-PSK
WPA2-EAP
WPA2-PSK
WPA-Auto-EAP
WPA-Auto-PSK
Select Open System to communicate the key across the network.
Select Shared Key to limit communication to only those devices that share the same
WEP settings.
Select Open System/Shared Key to allow either form of data encryption.
Select WPA-EAP, WPA2-EAP, WPA-Auto-EAP to secure your network with the inclusion
of a RADIUS server.
Select WPA-PSK, WPA2-PSK, WPA-Auto-PSK to secure your network using a
password and dynamic key changes. (No RADIUS server required).
Encryption:
Key Type*:
Key Size:
Valid Key:
First through
Fourth keys:
Select Disabled or Enabled. (Disabled is selected here).
Select HEX or ASCII.
Select 64-, 128-, 152-bits.
Select the 1st through the 4th key to be the active key.
*Hexadecimal digits consist of the numbers 0-9 and the letters A-F
ASCII (American Standard Code for Information Interchange) is a code for
representing English letters as numbers from 0-127
Home > Wireless>AP Mode>WEP Encryption
Disabled: Standard 802.11g support, no enhanced capabilities.
Super G without Turbo: Capable of Packet Bursting, Fast Frames,
Compression, and no Turbo mode.
Super G with Dynamic Turbo: Capable of Packet Bursting, Fast
Frames, Compression, and Dynamic Turbo mode.This setting is
backwards compatible with non-Turbo (legacy) devices. Dynamic
Turbo mode is only enabled when all devices on the wireless
network are congured with Super G with Dynamic Turbo enabled.
WMM-
Select Enable or Disable, Enable is selected by default. WMM
stands for Wi-Fi Multimedia, by enabling this feature it will improve
the user experience for audio and video applications over a Wi-Fi
network.
Input up to four keys for encryption. You will select one of these
keys in the valid key eld.