![](http://pdfasset.owneriq.net/8/6d/86da1894-383e-47f7-b53a-8ea4e3da94d0/86da1894-383e-47f7-b53a-8ea4e3da94d0-bg38.png)
56
Using the AP Manager (continued)
Firmware
To upgrade the rmware:
• Download the latest rmware upgrade from http://support.dlink.com to an easy
to nd location on your hard drive.
• Click on the rmware button as shown above.
• A popup window will appear. Locate the rmware upgrade le and click Open.
IMPORTANT! DO NOT DISCONNECT POWER FROM THE UNIT WHILE THE
FIRMWARE IS BEING UPGRADED.
You can upgrade the rmware by clicking on
this button after selecting the device(s).
You can customize the basic System Settings for
the DWL-2200AP by clicking on this button.
System Settings
• Access Password: This sets the admin password for
the selected device(s).
• Auto Refresh: This setting allows you to enable auto
refreshing of the network device list. By default this option
is disabled. If you choose to enable it, you must enter the
refresh interval in seconds.
All other settings on this screen should
be left at the default setting.