Filter
Top Products
31
Using the Conguration Menu (continued)
Advanced > Multi-SSID(continued)
Index-
The Primary SSID and Security cannot be changed here.Those values
follow the setting in Home>Wireless.
SSID-
When you Enable Multi-SSID you can name each Multi-SSID.
Key Type-
Key Size-
Key-
VLAN
Group ID-
Select HEX or ASCII
Select 64-,128-,152-bits
Select the 1st through the 4th key to b the active key. Enter key here.
When you Enable VLAN State and congure internal and Multi-SSID
networks on VLANs, this eld will be enable.
Provide a number between 1 and 4094 for internal VLAN.
This will cuase the access point to send DHCP request woth the VLAN
tags. The switch and the DHCP server must support VLAN IEEE802.1Q
frames.The access point must be able to reach the DHCP Server.
Check with the Administator greading the VLAN and DHCP congurations
The Security option for these seven Multi-SSIDs are
None, Open System or Shared Key, WPA-EAP, WPA-PSK,
WPA2-EAP, WPA2-PSK, WPA-Auto-EAP, WPA-Auto-PSK
Security-
Advanced > Multi-SSID > WEP Encryption
Advanced > Multi-SSID > WPA-PSK, WPA2-PSK, WPA-Auto-PSK
Cipher
Type:
Group Key
Update Interval:
Select the interval during which the group key wll be valid. The
default value of 1800 is recommended.
Select AES, AUTO or TKIP from the pull down menu.
PassPhrase:
Enter a PassPhrase in the corresponding eld.
Note: If any of the SSID uses security of WPA-PSK, WPA2-PSK, WPA-Auto-PSK,
WPA-EAP, WPA2-EAP, WPA-Auto-EAP, it will occupy the key space 2 and 3, leaves
only key 1 and key 4 for other SSIDs to use for WEP key.
The Multi-SSID’s security can be WPA-EAP, WPA2-EAP, or WPA-Auto-EAP only when
the Primary SSID’s security is at the same security level. Also, they must connect to the
same RADIUS server.