D-Link DWL-2200AP Network Router User Manual


 
22
Using the Conguration Menu (continued)
Home > LAN
LAN is short for Local Area Network. This is considered your internal network. These
are the IP settings of the LAN interface for the DWL-2200AP. These settings may be
referred to as private settings. You may change the LAN IP address if needed. The LAN
IP address is private to your internal network and cannot be seen on the Internet.
Click Apply to save the changes.
Get IP From-
Select Static (Manual) or Dynamic (DHCP) as the method you
will use to assign an IP address to the DWL-2200AP.
Apply-
Default Gateway-
This eld is optional. Enter in the lP address of the gateway
on your network.
Subnet Mask-
The subnet mask of the LAN interface.
The default subnet mask is 255.255.255.0
IP Address-
The IP address of the LAN interface. The default IP address
is: 192.168.0.50