Filter
Top Products
51
Active Subnet Mask:
Show the active subnet mask of this switch.
Active Gateway:
Show the active gateway of this switch.
DHCP Server:
Show the IP address of the DHCP server.
Default: 0.0.0.0
Lease Time Left:
Show the lease time left of DHCP client.
Device Name:
Set a special name for this switch. Up to 16 characters are allowed in
this parameter. Any alphanumeric character and null are acceptable.
Default: Giga Switch
DHCP Enabled:
Enable DHCP snooping, Just tick the check box (;) to enable it.
Default: disable
Fallback IP Address:
Users can configure the IP settings and fill in new values. Then, click
<Apply> button to update.
Default: 192.168.1.1
Fallback Subnet Mask:
Subnet mask is made for the purpose to get more network addresses
because any one IP device in a network must own its IP address,
composed of Network address and Host address, otherwise it can’t
communicate with other devices on the network. But unfortunately, the
network classes A, B, and C are all too large to fit for almost all networks,
hence, subnet mask is introduced to solve this problem. Subnet mask
uses some bits from host address and makes an IP address looked
Network address, Subnet mask number and host address. It is shown in
the following figure. This reduces the total IP number of a network able to
support, by the amount of 2 to power of the bit number of subnet number
(2^(bit number of subnet number)).