Filter
Top Products
60
4-2-7. RSTP
RSTP detects and breaks network loops and provides backup links between
switches, bridges or routers. It allows a switch to interact with other RSTP –
compliant switches in your network to ensure that only one path exists between any
two stations on the network.
The switch allows you to create multiple STP configurations and assign ports
to a specific tree.
Function name:
RSTP System Configuration
Function description:
This screen is used to display the RSTP system configuration and necessary
parameters.
Parameter description:
System Priority:
System priority is used in determining the root switch, root port and
designated port. The switch with the highest priority (lowest numeric
value) becomes the STP root switch. If all switches have the same
priority, the switch with the lowest MAC address will then become the
root switch. Select a value from the drop-down list box.
The lower the numeric value you assign, the higher the priority for this
system.
Default: 32768
Hello Time:
This is the time interval in seconds between BPDU configuration
message generations by the root switch. The allowed range is 1 to 10
seconds.
Default: 2
Max Age:
This is the maximum time a switch can wait without receiving a BPDU
before attempting to reconfigure. The allowed range is 6 to 40 seconds.
Default: 20
Forward Delay:
This is the maximum time (in seconds) a switch will wait before changing
states. The general rule: 2 * (Forward Delay – 1) >= Max Age >= 2 *
(Hello Time + 1)
Default: 15
Force version:
Select RSTP or STP protocol from the drop-down list box.
Function name: