Filter
Top Products
74
4-2-12 Filter
Function name:
Filter Configuration
Function description:
This function can set management’s source IP Address to each port, simple
and raise safety. After completing the function’s setting, press <Apply> button to
have this function in effect.
Parameter description:
Source IP Filter:
Mode:
There are three types of modes in this drop-down menu. Default is
disabled.
Disabled:
Allow users from all IP address to log in to this switch and manage
it.
Static:
Only the user from the IP Address set by administrator is allowed to
login to this switch and manage it..
DHCP:
Allow the user from an IP Address given by the DHCP server to
login to this switch and manage it.
IP Address:
Setting up the IP Address, it can be one IP Address or a LAN.
IP Mask:
Setting up the IP Subnet Mask necessary for the IP Address.
DHCP Server Allowed:
Just tick the check box (
;) under the port x to allow the DHCP Server
giving out an IP address; and valid ports are 1~24.
Default: enable