Filter
Top Products
B-65
Touchscreen
Connector
The touchscreen connector, P3, is a dual row by six position header with 0.025 inch
square pins spaced on 0.100 centers. P3 mates with the Berg Mini-Latch receptacle
on the IntelliTouch® touchscreen cable. The pins are numbered as shown in
Figure B.2 on page 66. The withdrawal force exceeds 3.9 lbs.
Power Connector, P4
The power connector, P4, is a 2 row by five-position header with 0.025-inch pins on
0.100 centers. The header is compatible with insulation displacement cable (IDC)
connectors such as Berg series 71600, series 71602, series 66900, and series 66902,
Molex style 40312, Amp series 746285 and series 746288 receptacles. The header is
also compatible with crimp termination, discrete wire receptacles and housings
including Berg Mini-Latch housings and Mini-PV receptacles, Molex series 70450
connectors, and the Amp AMPMODU Mod. IV connector family. Pin numbering
schemes for discrete wire connectors differ between manufacturers.
Refer only to Figure B.3 on page 66 for pin number locations. Signal connections are
shown on page Table B.3 on page 67.