Filter
Top Products
3
3-28
Departmental Switch Models DS-16B and DS-8B Web Tools User Guide
Using Web Tools
Delete Cfg Deletes the configuration selected in the Config Name field.
Rename Cfg Renames of the configuration selected in the Config Name
field.
Zone/QLoop
Selection List
Provides a list of the zones and QuickLoops available to add
to the configuration.
Add Member Adds the switch selected in the Zone/QLoop Selection List
to the Configuration Members list.
Remove Member Removes the selected member from the [Configuration
name] Members list.
[Configuration
name] Members
The members of the configuration selected in the Config
Name field. The name of this list depends on the selection.
Only one configuration can be enabled at a time; if none are
enabled, zoning is not active in the fabric.
Enable Config Enables the configuration selected in the Config Name field,
or uncheck to disable it.
Config to enable Displays the name of the configuration that is currently
selected for enabling. This configuration can be enabled by
clicking Apply.
Config currently
enabled
Displays the name of the currently enabled configuration.
Only one configuration can be enabled at a time.
Apply Applies all changes made since the Zone Administration
View was opened, including changes made on other tabs in
the view. Changes cannot be cancelled once they are
applied.
Cancel Cancels all changes since they were last applied and to exit
the Zone Administration View. Changes cannot be
cancelled once applied.
Done Applies all changes made since the Zone Administration
View was opened and to exit the Zone Administration
View.
Table 3-11 Config Tab Fields (continued)