Filter
Top Products
3
3-30
Departmental Switch Models DS-16B and DS-8B Web Tools User Guide
Using Web Tools
Table 3-12 describes the items and information available in Switch
View.
Table 3-12 Switch View
Port icons The letters in the Port icon indicate the GBIC (Gigabit Interface
Converter) type, as follows:
blank — No GBIC present.
SW — Short wave GBIC
LW — Long wave GBIC
CU — Copper GBIC
SWID — Short wave serial ID GBIC
LWID — Long wave serial ID GBIC
CUID — Copper serial ID GBIC
A yellow outline around a port icon indicates port failure. For detailed
port information, click the Port icon to see the Port Information View.
Port numbers
(on the right of
each port)
The number of the port.
LED Status
Indicators
(round light
next to each
port)
The color indicates the status of the port:
• No light — No device attached
• Steady yellow — Receiving light, but not online; check cable
connections
• Slowly flashing yellow — Disabled (diagnostics or portDisable
command).
• Rapidly flashing yellow— Error, fault with port
• Steady green — Online (connected with device by cable)
• Slowly flashing green — Online but segmented (loopback cable or
incompatible switch)
• Rapidly flashing green — Internal loopback (diagnostic)
• Flickering green — Online and transmitting/receiving frames
Power supply Removable power assemblies are updated to show presence/absence
and status of each:
• Green — Power supply present and operational.
• Red X — Power supply present but not operational.
• Cover plate — Power supply absent or not fully plugged in.
Events Accesses Switch Events View
Telnet Launches a Telnet session