Filter
Top Products
3
Switch View
3-31
Using Web Tools
Fabric Watch
(optional
software)
Accesses Fabric Watch
Fan The background color of the button indicates the overall status of the
fans:
• Green — Healthy
• Yellow — Marginal (mix of good and faulty readings)
• Red — Down (more than two faulty readings)
• Gray — Unknown or unmonitored
Admin Displays the Administrative Interface where you can perform switch
management functions.
Perf Displays the Performance View where you can monitor switch
performance.
Beacon Turns on the beaconing function. If on, this icon shows beams of light.
The beaconing function helps to physically locate a switch by sending a
signal to the specified switch, resulting in an LED light pattern flashing
from side to side on the switch.
Temp Displays temperature readings from all switch thermo sensors. The
background color of the button indicates the overall temperature status:
• Green — Healthy
• Yellow — Marginal (mix of good and faulty readings)
• Red — Down (more than two faulty readings)
• Gray — Unknown or unmonitored
WWN Displays the unique numeric identifier for each switch; assigned by
manufacturer.
Domain ID Displays the unique numeric identifier for each switch in a fabric.
Role Indicates the current role of the switch:
• Principal —The principal switch as defined by FC_SW protocol.
• Subordinate — Enabled but not the principal switch.
• Disabled — Disabled.
Table 3-12 Switch View (continued)