Filter
Top Products
1--2Overview
Settings Overview
The controller settings c an be displayed and changed from the keypad.
Some settings may require a password (if the controller is set up for one).
From the ATS Status display, press Enter/Save Settings ¿ keytomovetothe
Settings level of menus.
Press the right arrow key " to see the eight parameter information headings (as
shown below). An overview of each setting is listed below. The detailed menus
for each setting are on the following pages.
8 Parameter Menus (loop back to beginning)
SETTINGS
T ime Delays
SETTINGS
Voltage DO PU
Frequency DO PU
SETTINGS
Features
SETTINGS
General
SETTINGS
Engine Exerciser
VIEW
Event Log
SERVICE
Statistics
Diagnostics
SERVICE
Factory
Selectable Features
Voltage and Frequency Settings seepage2–2
CP settings and Normal & Emergency voltage and frequency pickup & dropout.
Time Delay Settings seepage2–4
Bypass running time delay, and settings for all standard t ime delays.
Features Settings seepage2–6
Commit on transfer, shed load, phase rotation, and inphase monitor settings.
General Setting s seepage2–8
Reset settings, language, communication, logging, and password.
Engine Exerciser Settings seepage2–10
Present date and time, seven exercise programs each with six parameters.
View Event Log seepage2–12
L ast 99 events in date and time order; six types and seven reasons are logged.
Service Statistics/Diagnostics, Factory Selectable Features
For factory service use only. see pages 2–13
SETTINGS