Filter
Top Products
Password
Default password is 1111 (see page 2–8)
2--1 Settings
How to Change a Setting
To change a setting in the controller (CP):
¡ Navigate to the settings screen that you want to change (see page 1–2).
© Press Enter/Save Settings ¿ key to start the first field blinking. If the controller
requires a password, see below.
¢ Press up Y and downB arrow keys to change flashingdigit(s) or word and press
Enter/Save Settings ¿ keytomovetonextfield.
£ Repeat step ¢ until all the fields have been entered.
If a field is blinking, the CP is waiting for information to be entered.
The Esc key will end the editing session.
If Enter Password displays, you must enter the correct password first.
Use the up Y and down B arrow keys to change the flashing digit of the
password. Press the Enter/Save Settings ¿ keytomovetonextnextdigit
(left to right). When the correct password is displayed, press the Enter/
Save Settings ¿ key.
If WRONG PASSWORD !!! displays, you are returned to the first flashing
digit. When the correct password is displayed, press the Enter/Save
Settings ¿ key.
You can now change the settings on the selected screen.
Once the password is entered it will stay unlocked for 5 minutes after last
key is pushed so that you do not have to keep entering it. So, to save time,
plan to make all your settings at one time.
Enter
Password
0
000
¢
£
¡
©
Tip
☞
Tips
☞
Tip
☞