Filter
Top Products
Installation of the RTM-ATCA-7150
ATCA-7150 and RTM-ATCA-7150 Getting Started (6806800G42B)
44
2.6.1 Precautions
Note the following points at the time of installing or replacing components:
z Make sure that you wear an electrostatic discharge (ESD)-preventive wrist strap to prevent
the static electricity from hurting you or damaging the device.
z Keep the area where the components reside clean and keep the components away from
the heat-generating devices, such as radiators.
Incorrect installation or removal of additional devices or modules may damage the product
or the additional devices or modules.
Before installing or removing additional devices or modules, read the respective
documentation.
Electrostatic discharge and incorrect installation and removal of the product can damage
circuits or shorten their life.
Before touching the product or electronic components, make sure that your are working in
an ESD-safe environment.
Do not exert too much force when you insert the blade.
If the blade is not fully aligned with the interface in the backplane, too much force may twist
the pins on the blade or backplane.
Do not touch the connectors of power cords and communication cables.
There is current in the power cords and communication cables. Touch on the connectors of
the power cords and communication cables may cause electric shock.