Filter
Top Products
Hardware Installation of ATCA-7150
ATCA-7150 and RTM-ATCA-7150 Getting Started (6806800G42B)
80
Table 3-5 lists the optional components supported by the ATCA-7150.
3.6.3 Preparations
Before you install or replace the component, make the following preparations:
z Confirming the feasibility of the operation
— There are available spare parts of the component to be installed or replaced in the
equipment warehouse. When the available spare parts are lacking, contact Emerson
Network Power for help in time. For details on how to get help from Emerson Network
Power, see Contacting Emerson Network Power for Technical Support on page 100.
— Make sure that the new component is in good condition, without defects such as
oxidation, chemical corrosion, missing component, or transportation damage.
— By reading this document, you are familiar with how to install and replace the
component and master the skills required by the operation.
z Checking the environment
Make sure that the shelf, power supply, temperature, and humidity meet the operating
requirement for the blades and components. For details, refer to the respective system
documentation.
Table 3-5 Optional Components Supported by the ATCA-7150 Suite
Blade Supported Component
ATCA-7150 and
RTM-ATCA-7150
DIMM
Hard disk
Daughter cards on the RTM
For more information on the daughter cards, refer to RTM-ATCA-7150 Installation and Use
Manual, MESC-RTM-7150-FC Installation Information, and MESC-RTM-7150-GE Installation
Information.