Filter
Top Products
Hardware Installation of ATCA-7150
ATCA-7150 and RTM-ATCA-7150 Getting Started (6806800G42B)
85
For details, see Removing the ATCA-7150 on page 95.
3. Open one fixing clip of the DIMM carefully until the DIMM rises from the interface. Hold the
top edge of the DIMM and open the other fixing clip carefully until the DIMM is removed
from the interface, as shown in Figure 3-5.
4. Take the DIMM out of the interface carefully, as shown in Figure 3-5.
5. Place the faulty DIMM in the antistatic package.
6. Take the new DIMM out of the antistatic package.
7. Install the new DIMM.
For details, see Installing the DIMM on page 82.
Product Damage
z To avoid breaking them or damaging the DIMM interface, do not exert too much power
to operate the fixing clips.
z If you open the two fixing clips of the DIMM at the same time, the DIMM bounces from
the interface. Operate the fixing clips carefully to avoid damaging the DIMM.