Emerson ATCA-S201 Power Supply User Manual


  Open as PDF
of 157
 
RTM-ATCA-SXXX Overview
6806800H62B ATCA‐S201InstallationandUseGuide99
A Pop-up window notifies the user when the flash update completes. The new software becomes
active at next reboot. A blade reboot button is available on the ‘ATCA Status’ menu (see
StorBlade99 ATCA-S201 Blade 1 (0x96) Status
Vendo r IANAID Name
HW
Revision
H8FW
Revision
IPMIRev Model Serial
Emerson 65cd ATCA‐S201 0004 01.10 0 1.50 ATCA‐S201 1 00LYMMSSSS
AMC Site B1 (0x7a) Configuration
PhyNum Ty pe SASAddress Handle P arent
Disk 00 SAS 5000cca000784 c49 0009 0001
Vend or Product Model Serial State Present MgEna MgOK PayEn a PayOK
AMCState Emerson AMC‐S402 0106825G 068NYMxxxx Enabled True True Tru e True True
Site
Control
AMC Site B2 (0x7c) Configuration
PhyNum Ty pe SASAddress Handle P arent
Disk 01 SAS 500000e016cbd032 000a 0002
Vend or Product Model Serial State Present MgEna MgOK PayEn a PayOK
AMCState Emerson AMC‐S402 0106825G 068NYMxxxx Enabled True True Tru e True True
Site
Control
AMC Site B3 (0x7e) Configuration
PhyNum Ty pe SASAddress Handle P arent
Disk 02 SAS 5000c50005b18 665 000b 0003
Vend or Product Model Serial State Present MgEna MgOK PayEn a PayOK
AMCState Emerson AMC‐S402 0106825G 068NYMxxxx Enabled True True Tru e True True
Site
Control
AMC Site B4 (0x80) Configuration
PhyNum Ty pe SASAddress Handle P arent
Disk 03 SAS 500000e016cbd982 000c 0004
Vend or Product Model Serial State Present MgEna MgOK PayEn a PayOK
AMCState Emerson AMC‐S402 0106825G 068NYMxxxx Enabled True True Tru e True True
Site
Control
AMC Site B5 (0x8e) Configuration
Vend or Product Model Serial State Present MgEna MgOK PayEn a PayOK
AMCState Emerson RTM 0106828G 401NYMxxx Enabled True True True True True
Site
Control
Disable
Enable
Disable
Enable
Disable
Enable
Disable
Enable
Disable
Enable
RebootRefresh PowerOff
Step 4. Figure 14), or via shell console prompt using:
# reboot
9.3.2 flash_update.sh tool usage and options
Emerson offers a shell script (.sh) to update firmware code stored in flash. This
command line script is named sbflash, and is located on the /bin directory of the
ATCA-S201.
SYNOPSIS
sbflash [-r] [-k] [-u] [-t tftp_serverIP]
DESCRIPTION
sbflash is a shell script which enables the user to selectively update some or all of the
firmware components. A blade reboot is required to activate the new firmware
components.
 previous next