Filter
Top Products
RTM-ATCA-SXXX Overview
6806800H62B ATCA‐S201InstallationandUseGuide40
CLI command syntax
Table 14 CLI command syntax, set network property: system date
Convention
atca_blade set_network Y 2+ <date> +
<date> Date format MM/DD/YYYY, (month,day,year)
4.6.4 Time
<Read/Write> The user may manually adjust the system time, if NTP is NOT enabled.
Date must be entered as hours/minutes/seconds. (e.g. 14:51:59 to indicate 2:51 PM
and 59 seconds).
CLI command syntax
Table 15 CLI command syntax, set network property: system time
Convention:
atca_blade set_network Y 3+ <time> +
<time> hh:mm:ss (for example, 01:23:45), where hh (00 to 23), mm and ss (00 to 59)
4.6.5 Time Zone
<Read/Write> World Time references are synchronized with GMT. The drop-down
time zone field allows the user to choose a city matching the physical deployment
region and daylight savings observance. To minimize code size, only one city per
world time zone was chosen. The valid list of drop down field are shown in Table 17
Ti
me Zone
Selections.
CLI command syntax
Table 16 CLI command syntax, set network property: system time zone
Convention:
atca_blade set_network Y 4+ <zone> +
<zone> Pick from list in Table 17 Time Zone Selections. E.g. New_York, Chicago etc.