Filter
Top Products
RTM-ATCA-SXXX Overview
6806800H62B ATCA‐S201InstallationandUseGuide105
10 ATCA-S201 Mechanical
and Connector Information
This chapter provides the specifications and connector pin outs for the ATCA-S201 module.
10.1 Specifications for the ATCA-S201
This section provides mechanical, electrical, environmental, and other relevant
physical information.
10.1.1 Physical dimensions
The ATCA-S201 is an 8U (280 mm) height board with 325 mm in depth for standard
applications. It complies with IEEE 1101.11 mechanical standards, as required by the
PICMG 2.0 Revision 3.0 specification. The ATCA-S201 is keyed to conform to the
PICMG 2.10, Keying of ATCA Boards and Backplanes specification.
10.1.2 Power Requirements
The ATCA-S201 includes a stacked power supply module with maximum rated
output of 210 W of power. This represents a surplus of power vs. the expected
power consumption. The power consumption of the RTM is limited to 25 W
maximum. The unpopulated base blade (no AMC or RTM) blade will consume 1.04 A
at 48 V (50 W).
10.1.3 Environmental Specifications and Compliance
The environmental specifications for the ATCA-S201 assembly are presented in the
table below.