Filter
Top Products
ATCA‐S201Overview
6806800H62B ATCA‐S201InstallationandUseGuide12
Table 2 LED functional description
LED Description
ATCA Hot Swap LED
Off: Normal, default state
Blue-Blinking: Preparing for hot swap
Blue-ON: ready for hot-swap removal
ATCA Blade OK LED Green-ON: Blade Optimal
ATCA Boot (Health) status
Amber: Blade is resetting
Green: Blade is optimal
ATCA Out of service (OOS)
Off: Normal, default state
Yellow-Blinking: firmware update in progress
Red-ON: Out of service (PPC/IPMC)
1.5 Software driver support
The ATCA-S201 provides several IP storage services over the 10GbE fabric and 1 GbE
base connections. Major services include iSCSI, NFS, and SMB. ATCA node boards
with standard OS installations, require no special drives from Emerson. This product
is compatible with the following operating systems and services:
Solaris 10 (SPARC) Operating System, NFS
Solaris 10 (SPARC) Operating System, iSCSI initiator
Solaris 10 (x86) Operating system, NFS
Solaris 10 (x86) Operating system, iSCSI initiator
SuSE Linux Enterprise Server 10, NFS
SuSE Linux Enterprise Server 10, iSCSI initiator
RedHat Enterprise Linux 5.0_u4, NFS
RedHat Enterprise Linux 5.0_u4, iSCSI initiator
Windows Server 2003 CIFS (a dialect of SMB)
Windows Server 2003, iSCSI initiator
1.6 Part Number, Serial Number, and Address Labels
At manufacturing time, several labels are affixed to the ATCA-S201 as shown below.
For proper identification of the AMC module, use these barcode labels to determine
the module identity. The barcode labels provide the following information:
Table 3 ATCA-S201 Identification Labels
Label Description
Label 1: Top/Final assembly P/N For Internal Use Only
Label 2: Sub assembly P/N For Internal Use Only
Label 3: Serial number (S/N)
Format: AAALYMMSSSS
(example: 100S8031234)
AAA = Assembly Number (100)
L =Location of manufacturer (S)
Y = Calendar year of manufacturer (2008 = 8)
MM = Calendar month of manufacturer (March = 03)
SSSS = Sequence number (reset each month) (1234)