Filter
Top Products
General Configuration Screen
Device Configuration Menu Screens 4-11
4.2.5 Setting the Module Name
To set the module name, perform the following steps:
1. Use the arrow keys to highlight the Module Name field.
2. Enter the name of your system (maximum of 19 characters).
3. Press ENTER to set the name in the input field.
4. Use the arrow keys to highlight the SAVE command and press ENTER. The message “SAVED
OK” displays on the screen.
4.2.6 Setting the Device Date
The device is year 2000 compliant so that the Device Date field can be set beyond the year 1999.
To set the system date, perform the following steps:
1. Use the arrow keys to highlight the Device Date field.
2. Enter the date in this format: MM/DD/YYYY
3. Press ENTER to set the system calendar to the date in the input field.
4. Use the arrow keys to highlight the SAVE command at the bottom of the screen and press
ENTER.
If the date entered is a valid format, the message displays “SAVED OK” at the top of the screen. If
the entry is not valid, Local Management does not alter the current value, but it does refresh the
Device Date field with the previous value.
NOTE: It is not necessary to add separators between month, day, and year numbers, as
long as each entry has the correct number of numeric characters. For example, to set
the date to 03/17/2000, type “03172000” in the Device Date field.