Filter
Top Products
Built-in Commands
Network Tools Screens 11-33
Examples:
To set the device to use the 802.1D legacy path costs, enter:
-> stpLegacyPathCost enable
To set the device to use the 802.1t path costs (default setting), enter:
-> stpLegacyPathCost disable
To determine if the device is currently operating using 802.1t or 802.1D path
costs values, enter:
-> stpLegacyPathCost status
stpPointToPointMAC
Description: Displays the current values or sets the value of stpPointToPointMAC to
TRUE, FALSE or AUTO.
Syntax: stpPointToPointMAC [ status ] [ value ]
stpPointToPointMAC [ value ] [ vlan id ] [ port range ].
Options: status — Displays the current stpPointToPointMAC settings.
value — Sets stpPointToPointMAC as true, false or auto, or displays settings
with those values.
vlan id — Specifies a VLAN ID.
port range — Specifies a range of ports.
Examples:
Shows all VLAN ports with a value of true:
-> stpForceVersion MAC status true
Shows all VLAN ports with a value of false:
-> stpForceVersion MAC status false
Shows all VLAN ports with a value of auto:
-> stpForceVersion MAC status auto
Changes the value of stpForceVersion MAC for a port or range of
ports.
-> stpForceVersion MAC auto 2 1-32
stpLegacyPathCost (Continued)