Filter
Top Products
Built-in Commands
Network Tools Screens 11-29
Options: PROTOCOL — Specifies a protocol for which information will be
displayed.
TABLE — Specifies a type of table to display.
fid – Show MAC addresses for the filter database identifier (fdbId).
address – Show the address (mac) if it is known by the device.
port – Show the addresses for the port (portNumber) only.
type – Show addresses of the specified type only. Valid types are:
other, tp_learned, sr_learned, self, management, priorityq, multicast,
broadcast, staticfilt, agedout
Default – Show all MAC addresses for the device.
Examples:
-> show Appletalk interfaces
# Interface AdminStatus OperStatus MTU Forwarding Framing
# 1 enabled enabled 1500 enabled ethernet
# 2 disabled disabled 1500 disabled ethernet
> show IP ARP
# Interface MediaType Physical|Address NetworkAddress
#3 3(dynamic) 00:00:1d:04:40:5d 123.456.40.1
#4 3(dynamic) 08:00:20:0e:d8:31 123.456.40.30
# Number of valid entries: 2
-> show mac
MAC Address FID Port Type
----------------- ---------- ---------- ----------
00:00:1D:00:00:20 1 0010 tp_learned
00:00:1D:00:03:20 1 0010 tp_learned
00:00:1D:C3:BE:53 0 0001 self
00:00:1D:C3:BE:63 0 0017 self
more? (y or n)
show (Continued)