Filter
Top Products
Access Control List Screen
Device Configuration Menu Screens 4-23
4.6 ACCESS CONTROL LIST SCREEN
When to Use
To view, enable, or disable the Access Control List (ACL) and configure address filtering to
provide additional security. This enables you to limiting user to the device according to their IP
address. Up to 16 single IP addresses and/or range of addresses can be configured. To manage an
ACL enabled device, the management station must be a member of the ACL and authenticated
according to traditional SNMP rules.
How to Access
Use the arrow keys to highlight the ACCESS CONTROL LIST menu item on the SNMP
Configuration Menu screen, and press ENTER. The Access Control List screen, Figure 4-10,
displays.
Screen Example
Figure 4-10 Access Control List Screen
NOTE: Clearing NVRAM will remove all IP address entries and return the access
control state to DISABLED.
When the ACL is disabled, host access is not restricted.
3528_01_108
131.130.12.0
182.15.2.1
12.1.6.1
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
180.150.200.3
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Access Control Lists: [ENABLED]
IP Addr
IP Addr
Mask
Mask
255.255.255.0
255.255.0.0
255.0.0.0
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
RETURNSAVE
EXIT