Enterasys Networks 2H258 Network Card User Manual


 
RMON Statistics Screen
Device Statistics Menu Screens 10-11
Oversized Pkts
(Read-Only)
See the number of frames received whose size exceeded 1518 data
bytes, not including preamble, but have a valid CRC.
Fragments
(Read-Only)
See the number of received frames that are not the minimum number of
bytes in length or received frames that had a bad or missing Frame
Check Sequence (FCS), were less than 64 bytes in length (excluding
framing bits, but including FCS bytes), and have an invalid CRC.
NOTE: It is normal for the Fragments field to increment.
Fragments are a normal result of collisions in a half-duplex
network.
Jabbers
(Read-Only)
See the total number of frames that were greater than 1518 bytes and
had either a bad FCS or a bad CRC.
Total Packets
(Read-Only)
See the total number of frames (including bad frames, broadcast
frames, and multicast frames) received on this interface.
Total Octets
(Read-Only)
See the total number of octets (bytes) of data, including those in bad
frames, received on this interface.
64 Octets
(Read-Only)
See the total number of frames, including bad frames, received that
were 64 bytes in length (excluding framing bits, but including FCS
bytes).
65 – 127 Octets
(Read-Only)
See the total number of frames, including bad frames, received that
were between 65 and 127 bytes in length (excluding framing bits, but
including FCS bytes).
128 – 255 Octets
(Read-Only)
See the total number of frames, including bad frames, received that
were between 128 and 255 bytes in length (excluding framing bits, but
including FCS bytes).
256 – 511 Octets
(Read-Only)
See the total number of frames, including bad frames, received that
were between 256 and 511 bytes in length (excluding framing bits, but
including FCS bytes).
512 – 1023 Octets
(Read-Only)
See the total number of frames, including bad frames, received that
were between 512 and 1023 bytes in length (excluding framing bits,
but including FCS bytes).
Table 10-4 RMON Statistics Screen Field Descriptions (Continued)
Use this field… To…