Filter
Top Products
Built-in Commands
Network Tools Screens 11-27
Examples:
-> rate_limit_mode status
Rate Limit Mode is: High Range (100Kbps - 1 Gbps).
-> rate_limit_mode low_range
This will reset board : Are you *SURE* ?
-> rate_limit_mode high_range
This will reset board : Are you *SURE* ?
reset
Description: Initiates a hardware reset of the device. This command initializes the CPU
processor, runs the onboard diagnostics, and restarts the software image,
which restores the user configuration settings from NVRAM. The user will be
queried to confirm the reset command to ensure against unwanted resets.
NOTE: The Network Tools connection to the device will be
terminated upon execution of this command.
Syntax: reset
Options: None
Example:
-> reset
RESET: Are you *SURE
-> Y
rate_limit_mode (Continued)