Filter
Top Products
Static VLAN Egress Configuration Screen
802.1Q VLAN Configuration Menu Screens 7-11
7.4 STATIC VLAN EGRESS CONFIGURATION SCREEN
When to Use
To set the type of egress (tag status) for each or all ports associated with a VLAN selected from the
Static VLAN Configuration screen. The ports can be set using the following selections:
• UNTAGGED – sets the port to transmit frames without a tag header. This setting is usually set
to configure a port connected to an end user device.
• TAGGED – sets the port to transmit frames with a tag header to associate the frame
with the VLAN. This setting is usually to configure a port as a trunk port to another switch.
• NO – sets the port so it does not transmit frames (tagged or untagged) of the VLAN.
How to Access
Use the arrow keys to highlight the line item with the VLAN ID of interest on the Static VLAN
Configuration screen and press ENTER. The Static VLAN Egress Configuration screen,
Figure 7-4, displays.
Screen Example
Figure 7-4 Static VLAN Egress Configuration Screen
30691_34
RETURN
EXIT
Port Egress
---- ----------
1 [ UNTAGGED ]
2 [ TAGGED ]
3 [ NO ]
4 [ TAGGED ]
5 [ TAGGED ]
6 [ TAGGED ]
7 [ UNTAGGED ]
8 [ UNTAGGED ]
SAVE NEXT PREVIOUS
VLAN ID: 2 FDB ID: 4 VLAN NAME: Test
SET ALL PORTS: [UNTAGGED]
Port Egress
---- ----------
9 [ UNTAGGED ]
10 [ UNTAGGED ]
11 [ UNTAGGED ]
12 [ TAGGED ]
13 [ NO ]
14 [ TAGGED ]
15 [ TAGGED ]
16 [ TAGGED ]
Port Egress
---- ----------
17 [ UNTAGGED ]
18 [ TAGGED ]
19 [ NO ]
20 [ TAGGED ]
21 [ TAGGED ]
22 [ TAGGED ]
23 [ UNTAGGED ]
24 [ UNTAGGED ]
Port Egress
---- ----------
25 [ UNTAGGED ]
26 [ UNTAGGED ]
27 [ TAGGED ]