Enterasys Networks 2H258 Network Card User Manual


 
Protocol Port Configuration Screen
7-36 802.1Q VLAN Configuration Menu Screens
Field Descriptions
Refer to Table 7-10 for a functional description of each screen field.
Table 7-10 Protocol Port Configuration Screen Field Descriptions
Use this field … To …
Classification Rule
Field
(Read-Only)
See the VID, Classification, and Definition of the line selected in the
VLAN Classification Configuration screen. For example, in
Figure 7-9, VID 1, Ether II Type, 0x0800 (DOD IP) was selected in the
VLAN Classification Configuration screen to access the Protocol Port
Configuration screen. All ports with YES in the Classify columns
indicate that they are associated with VID 1 and the Ether II Type
Classification. This causes the VLAN 1, Ether II Type frames that are
received to be classified into VID 1.
This will cause Ether II of type 0x0800 (DOD IP) frames to be
transmitted out all ports set to YES as frames belonging to VLAN 1.
Port
(Read-Only)
See the number of each port.
Classify
(Toggle)
See which ports are set to the VID/Classification displayed in the
Classification Rule field above the Port and Classify column headings.
This field toggles between YES and NO, which determines whether or
not the associated port is set to the VID/Classification indicated in the
Classification Rule field.
NOTE: As each Classify field is highlighted, the Event
Message Line (not shown) at the top of the screen indicates
the port type. For example: Fast Ethernet Front Panel, FTM
Backplane Port 3, and Gigabit Ethernet VHSIM.
If a port cannot be configured, NO will be displayed without
brackets.
In some cases the Classify field [NO] may have an asterisk
next to it. The asterisk indicates this classification rule is
active as a result of application by policy.
SET ALL PORTS
(Toggle)
Set all ports to the VLAN and Classification shown in the
Classification Rule field. The SET ALL PORTS field toggles between
NO and YES with NO as the default setting. YES associates all ports
set to YES to the VID/Classification shown in the Classification Rule
field.