Filter
Top Products
Section 3: Installing and Configuring the Print Server
AXIS 1440 User’s Manual 15
Connecting the
AXIS 1440 to an
Ethernet Network
Follow these steps to connect the AXIS 1440 to the network:
1. Turn the printer off and disconnect the AXIS 1440 external
power supply.
2. Locate the serial number on the bottom of the print server and
write it down. You need this number for network configuration.
3. Connect the AXIS 1440 to the printer’s parallel port.
4. Connect your AXIS 1440 to the network using a twisted pair
(10BaseT) cable.
5. Turn the printer on and connect the external power supply to the
AXIS 1440.
The AXIS 1440 is successfully connected to the network when the
network indicator begins to flash.
Now you’re ready to install your server on your network. See
Installation and Setup Overview on page 16 for information about
what to do next.
Note: ❏ Each AXIS 1440 Print Server is pre-configured with a unique
node address that is identical to the serial number. You can use
the AXIS 1440’s internal web server or AXIS NetPilot to change
the node address. See Section 9 Management and Configuration
for more information.