Filter
Top Products
Section 5: Setting Up Windows Workstations
AXIS 1440 User’s Manual 35
Section 5 Setting Up Windows
Workstations
This section describes how to use the AXIS print utilities for printing
in the Windows environment.
If you plan to use the AXIS 1440 in a multiprotocol environment, you
need to set it up in each environment in your network. See the
relevant sections in this manual:
Section 4 Performing Additional NetWare Setup on page 31
Section 6 Setting Up Macintosh Computers on page 47
Section 7 Setting Up OS/2 Workstations on page 49
Section 8 Setting Up - UNIX on page 53
Setting Up Windows 95, Windows 98, and Windows NT
Workstations
If you have a network supporting the NetBIOS/NetBEUI or TCP/IP
(LPR) protocols, use AXIS Print Monitor to configure AXIS 1440
printer ports on Windows 95, Windows 98 and Windows NT
workstations for peer-to-peer or client-server printing.
Install the utility on each workstation performing peer-to-peer
printing, and on server workstations in a client-server environment.
(See Software Installation on page 18 for instructions.) AXIS Print
Monitor allows users to access any shared network printer as if it were
connected directly to their workstations. It also allows users to enable
pop-up messages notifying them of error conditions.
You can use AXIS NetPilot or the internal web server to change the
print server’s default name or other default parameters. See Section 9
Management and Configuration on page 57.