Filter
Top Products
7.
Secure the drive to the bracket with the retaining screw.
Now you can replace the subassembly and the computer’s
cover. See Chapter 5 for instructions.
Removing a Hard Disk From the Vertical Position
You need to remove the hard disk drive from the vertical
position in the following cases:
0
You are replacing the drive
0
You are adding a second drive (either another hard disk
drive or a diskette drive) in the lower horizontal position.
Follow these steps:
1.
Remove the retaining screw securing the hard disk drive
mounting plate to the subassembly and set it aside.
retaining screw-?
2.
Tilt the hard disk drive slightly to the right and lift it off
the subassembly.
Installing and Removing Disk Drives
7-17